The DHB pump series is a range of compact designed vertical, in-line, centrifugal pumps having a minimum of parts to facilitate easy maintenance. Pumps are fitted with a spacer coupling allowing good access during inspection and service and enabling removal of the rotating element without disturbing the motor/driver.

The pump series, designed for medium usage, features a separate single bearing arrangement for the rotating element and allows assembly with a range of IEC standard electric motors.

The QV pump series is a range of vertical, in-line, axial split, centrifugal pumps of single or multi stage design. The design provides easy access for inspection and service without disturbing the rotating element, the motor/driver or surrounding pipe system.

The pump series, designed for high efficiency and low NPSH under heavier and continuous duties, features a separate double bearing arrangement for the rotating element, an axially balanced rotating element and allows assembly with a wide range of IEC standard electric motors.

The pump series can be provided with a range of shaft seals for media temperatures up to 180°C and can be supplemented with various types of priming systems according the application.

The CNLB pump series is a range of vertical, in-line, centrifugal pumps with flexible coupling (top pull out) providing easy access for inspection and service without disturbing the motor/driver or surrounding pipe system.

The pump series, designed for heavier and continuous duties, features a separate double bearing arrangement for the rotating element and allows assembly with a range of IEC standard electric motors.

Special pump covers can replace the standard pump cover for special applications.

The CNL pump series is a range of vertical, in-line, centrifugal pumps with flexible coupling (top pull out) providing easy access for inspection and service without disturbing the motor/driver or surrounding pipe system.

The pump series features direct coupling between the rotating element and motor which is selected from a range of IEC standard electric motors.

Bare shaft end suction back pull out pumps.

Common base plate for pump and driver including guarded flexible coupling supplied upon request.

The CVLS vertical turbine pump is designed for a very wide range of applications. The construction is based on a module concept.

Number of column pipes and stages, types of impellers and bowls, sealing systems, bearing arrangements, and the material selection will meet any requirement within its working area.

Horisontal Gear Pump. Reliable units designed for applications requiring a constant pulseless flow of non-corrosive liquids of a wide range of viscosity.

Suitable for industrial and marine purposes such as lubricating oil, transfer, unloading etc.

Certificate from any Classification Society available.